Tendrombohitra tariby metaly avo lenta misy fototra tokana (kofehy metrika)
Tendrombohitra tariby metaly avo lenta misy fototra tokana (kofehy metrika)
Sava lalana
Ny fihary tariby dia ampiasaina indrindra hanindrona, hanamboarana, hiarovana ny tariby amin'ny rano sy ny vovoka. Izy ireo dia mihatra amin'ny sehatra toy ny birao fanaraha-maso, fitaovana, jiro, fitaovana mekanika, lamasinina, motera, tetikasa sns.Afaka manome anao metaly avo lenta izahaytariby tariby miaraka amin'ny fotony tokana vita amin'ny varahina nopetahana nikela (Laharana baiko: HSM.DS), vy tsy misy pentina (Laharana baiko: HSMS.DS) ary aluminium (Laharana baiko: HSMAL.DS).
| Fitaovana: | Vatana: varahina nopetahana nikela; famehezana: fingotra silisiôma |
| Temperature Range: | Min -50℃,Max 200℃ |
| diplaoma fiarovana: | IP68(IEC60529) miaraka amin'ny peratra O mety ao anatin'ny elanelana clamping voafaritra |
| Properties: | |
| Certifications: | CE, RoHS |
famaritana
(Mifandraisa aminay raha mila fanazavana fanampiny raha mila habe na kofehy hafa tsy tafiditra ao anatin'ity lisitra manaraka ity ianao.)
| Article no. | tari-dresaka | Clamping range | GL | (H) | Haben'ny wrench | Fonosana |
|
| lafiny | mm | mm | mm | mm | vondrona |
| HSM.DS-M16/7 | M16 x 1.5 | 4~7 | 7 | 20.5 | 18 | 75 |
| HSM.DS-M20/10 | M20 x 1.5 | 7–10 | 7 | 22 | 22 | 32 |
| HSM.DS-M20/13 | M20 x 1.5 | 9–13 | 7 | 22.5 | 26/24 | 18 |
| HSM.DS-M25/13 | M25 x 1.5 | 9–13 | 7 | 23 | 28 | 18 |
| HSM.DS-M25/15 | M25 x 1.5 | 12–15 | 8 | 24 | 30/28 | 18 |
| HSM.DS-M32/15 | M32 x 1.5 | 12–15 | 8 | 24 | 30/36 | 18 |
| HSM.DS-M32/18 | M32 x 1.5 | 14–18 | 8 | 25 | 36 | 18 |
| HSM.DS-M32/22 | M32 x 1.5 | 18–22 | 8 | 27 | 40/38 | 8 |
| HSM.DS-M40/22 | M40 x 1.5 | 18–22 | 9 | 26 | 40/45 | 8 |
| *HSM.DS-M40/25 | M40 x 1.5 | 21–25 | 9 | 27 | 45 | 8 |
| *HSM.DS-M40/30 | M40 x 1.5 | 25–30 | 9 | 28 | 50/46 | 8 |
| *HSM.DS-M50/30 | M50 x 1.5 | 25–30 | 9 | 28 | 50/55 | 8 |
| *HSM.DS-M50/34 | M50 x 1.5 | 29–34 | 9 | 29 | 55 | 8 |
| *HSM.DS-M50/37 | M50 x 1.5 | 32–37 | 9 | 29 | 55 | 8 |
| *HSM.DS-M56/37 | M56 x 1.5 | 32–37 | 9 | 29 | 55/60 | 2 |
| HSM.DS-M56/40 | M56 x 1.5 | 35–40 | 9 | 32 | 60 | 2 |
| *HSM.DS-M56/43 | M56 x 1.5 | 38–43 | 10 | 32 | 65 | 2 |
| *HSM.DS-M63/43 | M63 x 1.5 | 38–43 | 10 | 31.5 | 65/70 | 2 |
| *HSM.DS-M63/46 | M63 x 1.5 | 41–46 | 10 | 31.5 | 70 | 2 |
| *HSM.DS-M63/51 | M63 x 1.5 | 45–51 | 10 | 35 | 75 | 2 |
