Filan'ny tariby metaly misy fototra tokana (kofehy Metrika/Pg)
Filan'ny tariby metaly misy fototra tokana (kofehy Metrika/Pg)
Sava lalana
Ny fihary tariby dia ampiasaina indrindra hanindrona, hanamboarana, hiarovana ny tariby amin'ny rano sy ny vovoka.Izy ireo dia mihatra amin'ny sehatra toy ny birao fanaraha-maso, fitaovana, jiro, fitaovana mekanika, lamasinina, motera, tetikasa sns.Afaka manome anao metaly izahaytariby tariby misy fotony tokana vita amin'ny varahina nopetahana nikela (Laharana baiko: HSM.D), vy tsy misy kilema (Laharana baiko: HSMS.D) ary alimo (Laharana baiko: HSMAL.D).
| Fitaovana: | Vatana: varahina nopetahana nikela;tombo-kase: FR-TPE;famehezana: fingotra novaina |
| Temperature Range: | Min -40℃,Max 100℃ |
| diplaoma fiarovana: | IP68(IEC60529) miaraka amin'ny peratra O mety ao anatin'ny elanelana clamping voafaritra |
| Properties: | |
| Fampiharana: | |
| Certifications: | CE, RoHS |
famaritana
(Mifandraisa aminay raha mila fanazavana fanampiny raha mila habe na kofehy hafa tsy tafiditra ao anatin'ity lisitra manaraka ity ianao.)
| Article no. | tari-dresaka | Clamping range | AG | GL | (H) | Haben'ny wrench | Fonosana |
|
| lafiny | mm | mm | mm | mm | mm | vondrona |
| HSM.D-M12/7 | M12x1.5 | 4~7 | 12 | 6 | 19.5 | 14 | 75 |
| HSM.D-M16/7 | M16x1.5 | 4~7 | 16 | 7 | 19.5 | 18/14 | 75 |
| HSM.D-M16/9.5 | M16x1.5 | 6.5–9.5 | 16 | 7 | 20.5 | 18 | 75 |
| HSM.D-M18/7 | M18x1.5 | 4~7 | 18 | 7 | 19.5 | 20/14 | 75 |
| HSM.D-M18/9.5 | M18x1.5 | 6.5–9.5 | 18 | 7 | 20.5 | 20/18 | 75 |
| HSM.D-M20/7 | M20x1.5 | 4~7 | 20 | 7 | 20 | 22/14 | 32 |
| HSM.D-M20/9.5 | M20x1.5 | 6.5–9.5 | 20 | 7 | 21 | 22/18 | 32 |
| HSM.D-M20/13 | M20x1.5 | 9–13 | 25 | 7 | 23 | 28/26 | 18 |
| HSM.D-M25/9.5 | M25x1.5 | 6.5–9.5 | 25 | 7 | 21 | 28/18 | 18 |
| HSM.D-M25/13 | M25x1.5 | 9–13 | 25 | 7 | 24 | 28 | 18 |
| HSM.D-M25/17 | M25x1.5 | 13–17 | 32 | 7 | 23.5 | 28 | 18 |
| HSM.D-M32/13 | M32x1.5 | 9–13 | 32 | 8 | 24.5 | 36/28 | 8 |
| HSM.D-M32/17 | M32x1.5 | 13–17 | 32 | 8 | 24 | 36/28 | 8 |
| HSM.D-M32/19 | M32x1.5 | 15–19 | 32 | 8 | 25.5 | 36 | 18 |
| HSM.D-M32/22 | M32x1.5 | 18–22 | 32 | 8 | 25 | 36 | 8 |
| HSM.D-M40/19 | M40x1.5 | 15–19 | 40 | 9 | 25 | 45/36 | 8 |
| HSM.D-M40/22 | M40x1.5 | 18–22 | 40 | 9 | 25.5 | 45/36 | 8 |
| HSM.D-M40/25 | M40x1.5 | 21–25 | 40 | 9 | 28 | 45 | 8 |
| HSM.D-M40/28 | M40x1.5 | 24–28 | 40 | 9 | 27.5 | 45 | 8 |
| *HSM.D-M50/25 | M50x1.5 | 21–25 | 50 | 9 | 28 | 55/45 | 8 |
| *HSM.D-M50/28 | M50x1.5 | 24–28 | 50 | 9 | 27.5 | 55/45 | 8 |
| HSM.D-M50/33 | M50x1.5 | 28–33 | 50 | 9 | 27.5 | 55 | 8 |
| HSM.D-M50/37 | M50x1.5 | 32–37 | 50 | 9 | 29.5 | 55 | 8 |
| *HSM.D-M50/40 | M50x1.5 | 35–40 | 50 | 9 | 32 | 55 | 8 |
| *HSM.D-M63/40 | M63x1.5 | 35–40 | 63 | 10 | 32 | 70/55 | 2 |
| *HSM.D-M63/46 | M63x1.5 | 40–46 | 63 | 10 | 35 | 70 | 2 |
| *HSM.D-M63/51 | M63x1.5 | 45–51 | 63 | 10 | 35 | 70 | 2 |
